Menzer ETS 150 5.0 Traducción De Las Instrucciones De Uso Originales página 24

7.2 Overview table
Problem possible causes
• The machine is • Mains plug is incorrectly inserted into
without function or the mains socket.
malfunctioning.
• Mains plug is defective.
• Mains fuse was tripped.
• The machine is too • The backing pad or abrasive is not
noisy. attached correctly.
• Machine vibration • The material or substrate to be pro-
is excessive. cessed is too hard.
• Incorrect backing pad mounted.
• The machine • Clogged extraction system.
produces too much
dust. • Dust bag in the industrial extractor
is full.
• Insufficient extrac-
tion performance. • Kink in the extractor hose.
• The extraction openings in the
backing pad and sanding disc are not
congruent.
• Too much of • The grit size of the abrasive is too
the substrate is large.
abraded.
• The entire sand- • The abrasive grit is incorrect or too
ing area displays a large and/or the incorrect type of abra-
bad or sub-optimal sive is being used.
surface quality.
• The material or substrate to be pro-
cessed is not yet completely dry.
• The material or substrate to be pro-
cessed is too soft and/or has a very high
filler content.
• Striae in the • Backing pad not flat on the substrate.
sanded area.
• The material or substrate to be pro-
cessed is too soft.
• Deteriorating • Reverse of the abrasive is worn.
adhesion of the
abrasive or the • Hook & loop layer on the backing pad
backing pad is worn.
accessory.
12 GB
remediation
• Check the plug connection; insert
the mains plug correctly into the mains
socket.
• Check the mains fuse.
• Contact the MENZER repair service.
• Attach the backing pad and abrasive
securely and centrically.
• Change the rotational speed.
• Choose another abrasive. Read our
abrasive overviews or seek advice.
• Mount the correct backing pad.
• Contact the MENZER repair service.
• Clean the extraction system.
• Empty the dust bag.
• Remove the kink.
• Position the extraction openings
congruently.
• Choose a smaller grit size.
• Choose a smaller grit size and/or a
different type of abrasive. Read our
abrasive overviews or seek advice.
• Read the data sheets and processing
instructions provided by the manufac-
turer of the material to be processed.
• Position the backing pad flat on the
substrate.
• Choose a smaller grit size.
• Replace the abrasive.
• Replace the backing pad.
• Use MENZER pad saver.
8. Transport and storage
The machine must only be transported in the
original MENZER packaging provided.
Always store the sander in its appropriate packag-
ing outside the reach of children and prevent
exposure to moisture.
9. Disposal
Do not dispose of electric power tools in house-
hold waste!
The power tools, their accessories and packaging
must be ecologically recycled in compliance with
national requirements!
EU only:
In accordance with the EU Directive
2012/19/EU on electrical and electronic waste,
electric power tools must be collected separately
and ecologically recycled.
10. Functional accessories and
peripherals
Only use original MENZER accessories matching
this particular power tool for optimal work results.
Y. Original MENZER accessories for ETS devices
(see page *3*) – not included in the scope of delivery:
https://www.menzer-tools.com/
service/ets-125-150-lp
Z. MENZER industrial vacuum cleaner
(see page *3*) - not included in the scope of delivery:
https://www.menzer-tools.com/
service/vcx-3x0-lp
11. EC declaration of conformity
0511-B01-01-000001-B
We hereby declare under our sole responsibility
that the machine designated below, placed on the
market by us and described in these operating
instructions, complies with the following stand-
ards. This declaration loses its validity in case of a
machine modification without our consent.
Product: Random Orbital Sander
MENZER ETS 150 [ 5.0 ]
Type:
Serial number range: 181 xxx xxx (EU)
MENZER ETS 150 [ 2.5 ]
Type:
Serial number range: 182 xxx xxx (EU)
MENZER ETS 125 [ 5.0 ]
Type:
Serial number range: 183 xxx xxx (EU)
MENZER ETS 125 [ 2.5 ]
Type:
Serial number range: 184 xxx xxx (EU)
Relevant EC directives
2006/42/EC; (EC) Nr. 1907/2006 (REACH);
2011/65/EU; 2014/30/EU
Angewandte harmonisierte Normen
EN 62841-1; EN 62841-2-4; EN 55014-1;
EN 55014-2; EN 61000-3-2; EN 61000-3-3
MENZER GmbH Torsten Ceranski
Celsiusstraße 20 Managing director
04420 Markranstädt Markranstädt,
Germany 16/11/2021
GB 13