MAINTENANCE SCHEDULE
Item
Action
Blade
Inspect
Blade
Inspect
mounting bolt
Check
Engine oil
Change
Check
Air filter
Clean
Replace
Grass bag
Check
Blade control
Check
operation
Check
Spark plug
Replace
Fuel tank
Clean
Flywheel
Check
brake pad
Valve
Check-
clearance
adjust
Fuel line
Check
1. Service more frequently when used in dusty areas.
2.Change engine oil every 25 hours when used under heavy load or in high outside air temperatures.
STORAGE
CAUTION: Never place any type of storage cover or tarp on the MOWER while it is still hot.
If the MOWER is being stored for extended periods of time (30 days or more), drain fuel tank and carburetor
bowl.
When storing the mower for extended periods of time:
1. Start the engine and run it until the tank, carburetor bowl and fuel line are completely empty and the engine
stalls.
2. Change the oil after each season.
3. Remove the spark plug. Use an oil-can to fill the cylinder with approx. 2 ml of oil. Slowly pull back the starter
handle, which will bathe the cylinder wall with oil. Screw the spark plug back in.
4. Clean the cooling fins of the cylinder and the housing.
5. Be sure to clean the entire equipment to protect the paint.
6. Store the equipment in a well-ventilated place.
NOTE: LIMITED WARRANTY does not cover fuel system damage or engine performance problems
resulting from neglected storage preparation.
Before
5 Hours of
First 25
each
use or first
hours of
use
month
use
x
x
x
x
x
x
x
Check every 2 years and replace if necessary
50 hours of
100 hours of
use or every
use or every
6 months
year
x
2
x
1
x
1
19
150 hours of use
or every two
years
x
x
x
1
x
x
x
x
x
x
x