EN
22
SAFETY INSTRUCTIONS
•
Do not use the device until it has been safely installed as described in this
guide.
•
Before use, check the voltage specified on the rating plate and only connect
the appliance to sockets that match the voltage of the appliance.
•
If the power cord is damaged, have it replaced by a qualified professional.
•
Do not place the heater directly under a power socket.
•
Ensure the appliance is kept one metre away from combustible materials such
as furniture, curtains or similar.
•
Do not leave the appliance unattended during operation.
•
Do not leave the device unattended when it is connected to the mains power
supply.
•
Use the device out of the reach of children. Children may only operate the
device under supervision.
•
The appliance is intended for use in the home and similar environments only.
It is not intended for commercial use.
•
Do not use the device if it malfunctions or has been damaged in any way.
•
Repairs may only be carried out by qualified specialists.
•
Incorrectly or independently performed repairs pose a risk of injury.
•
Do not run the power cord under carpets or rugs.
•
Make sure that the power cord does not come into contact with sharp edges
or hot surfaces.
•
To prevent it from overheating, do not cover the heater.
•
Do not use the appliance with an external timer, a remote-controlled socket or
any other device that automatically switches the heating on and off. There is a
risk of fire if the heater is covered or improperly positioned.
•
Do not immerse the device in water or other liquids.
•
Do not use the device near bathtubs, showers or swimming pools.
•
Do not use the device outdoors.
•
Do not use the device with wet hands.
•
Do not use the appliance on or near hot surfaces.
•
Do not use the device with a damaged power cord.
•
Before cleaning, unplug the device from the wall outlet and allow it to cool
completely.
•
Do not use abrasive cleaners for cleaning.
•
Never use accessories that are not recommended by the manufacturer or
expressly approved for the device. This could increase the risk of injury or
damage the device.