Publicidad
Idiomas disponibles
Idiomas disponibles
7.
The power indicator (6) lights up and the electric kettle heats the water.
The electric kettle will make noises during the heating process. This is not a malfunction.
8.
As soon as the water in the kettle (7) boils, the electric kettle turns off. The On/Off Switch returns to
the "0" position automatically and the power indicator (6) goes out.
9.
Disconnect the power cord (2) plug from the wall outlet, remove the kettle (7) from the base (5) and
pour the water. It is recommended to hold the handle further back.
Risk of burns!
Never touch the kettle (7) during or immediately after operation. Only hold or carry the
kettle using the handle (8).
When the water boils, hot steam will be emitted. Be careful not to burn yourself. Wear
oven gloves if necessary. Rotate the kettle (7) so that the steam is directed away from
you.
Maintenance/cleaning
Risk of burns!
Wait until the electric kettle is completely cool before cleaning it. Otherwise you could get
burnt.
Risk of electric shock!
Always remove the mains plug from the socket before cleaning. Failure to do so could
cause an electric shock.
Do not pour or spray any liquids onto the base (5) and do not immerse it in water or
other liquids. This could cause short circuits which could cause electric shocks or burns.
Warning about property damage
Do not use abrasive or astringent detergents or tools which could scratch the surface (e.g.
metal sponges). These could damage the electric kettle.
Rinse the kettle (7) out with clean water.
Clean the exterior of the kettle (7) and the base (5) with a slightly damp cloth. For stubborn dirt add a
little detergent to the damp cloth. Make sure there are no detergent residues on the kettle (7) or the
base (5) before operating the electric kettle again. Dry the kettle (7) and base (5) well before using
the electric kettle again.
To remove stubborn dirt inside the kettle (7) you can use a long-handled dishwashing brush or
bottle brush.
SilverCrest SWKC 2400 A1
English - 29
Publicidad
