MUHLER MCM-1599 Manual De Uso página 4

EN: ESPRESSO MAKER | Instruction Manual
TECHNICAL CHARACTERISTICS
Model Power Voltage
MCM-1599 1050 W 220-240V 50-60Hz
USING OF THE APPLIANCE
The first time use and preheating
To ensure the first cup of coffee tastes excellent, we recommend you should preheat and rinse the machine. Purified water is
preferred.
1. Open water tank cover, fill water into water tank, water level should not exceed the MAX line. Set up the water tank
vertically and align the buckles to the hole on the back of the machine, and press it down to be parallel to the top of the
machine.
2. Set steel mesh into the metal funnel (without coffee in steel mesh), make sure the tube on funnel aligns with groove in the
appliance, then insert the funnel into the appliance from the "UNLOCK" position, and fix them into coffee maker firmly by
turn it anticlockwise until it is at the "LOCK" position.
3. Place a mug or jug on removable cup shelf, make sure the steam control knob is at the OFF position.
4. Plug in the power source or connect the appliance from the mains supply, press power button, power button is illuminated
solidly, the 1 cup button and 2 cup button will pulse as the machine begins preheating. When the 1 cup button and 2 cup
button illuminate solidly, the preheating is finished.
5. Press the 1 cup button or 2 cup button, the appliance will pump water for about 30s, water will pass through the system,
then pour out in the mug and clean them thoroughly. Dispose of the water and repeat the process a further 3 times or
more.
Place the steam wand into a mug or jug and slowly turn the steam control knob until water dispenses, keep the steam control
knob open for at least 30 seconds and close the steam control knob. Take care performing this process as the hot water will pulse
into the receptacle, and it may emit steam.
Now the appliance is ready for making coffee.
NOTE: If preheating is not completed yet, press the 1 cup button or 2 cup button, the pump
does not work.During water flowing out, before the receptable is full, press the 1 cup button
or 2 cup button again to stop pumping water immediately.There may be noise when pumping
water for the first time or after a long time not used, it's normal that appliance is releasing the
air inside. After about 20s, the noise will disappear.
6
Water Tank capacity Pressure
1,5L 20 Bar
EN: ESPRESSO MAKER | Instruction Manual
MAKE ESPRESSO COFFEE
1. Remove funnel by turning it clockwise. Adding ground coffee into steel mesh with measuring spoon, a spoon of ground
coffee power can make about a cup of top-grade espresso coffee, then press ground coffee powder tightly with the tamper.
2. Set steel mesh into metal funnel, make sure the tube on the funnel aligns with groove in the appliance, then insert the
funnel into the appliance from the "UNLOCK" position, and fix them into appliance firmly by turning it anticlockwise until it
is at the "LOCK" position.
3. Place an espresso cup on removable cup shelf.
4. After preheating is finished, press 1 cup or 2 cup button, the product will start brewing
5. After finish making coffee, take metal funnel out by turning it clockwise, then pour coffee residue out with steel mesh
pressed by funnel holder clip.
6. Let them cool down completely, then rinse under running water.
WARNING: Do not leave the coffee maker unattended during making coffee, as you
need operate manually sometimes!
MAKE HOT WATER
When the preheating is finished, the coffee indicator lights up solidly. Then press 1 cup or 2 cup button, the water pump starts
to pump water. Turn the steam control knob to "Hot water", then hot water will flow out from the steam wand.
To stop making hot water, press the 1 cup or 2 cup button again, and turn the steam control knob to OFF position. Hot water is
used for warming cup, making tea or cooling down the appliance.
7