LawnMaster CLMF2434G Manual De Instrucciones página 21

OPERATION
To set the cutting height:
its current setting, and then move it towards the front of the mower and engage the lever in the
desired cutting height position.
its current setting, and then move it towards the back of the mower and engage the lever in the
desired cutting height position (Fig. 13).
height that is too low in longer grass will use more power and reduce battery run time. It is
recommended to cut longer grass in 2 passes or more. This method will also cause less
stress to your grass for a healthier lawn.
• Before you begin to mow, check to ensure that the blade is not blunt and that none of the
fasteners are damaged. To prevent any imbalance, replace blunt and/or damaged blades. To
Battery Pack Operation
Battery Charging
WARNING
Check the power voltage! Battery chargers operate on 220-240V AC.
Ensure the battery is charged between 4°C and 40°C. This ensures an optimum battery service
life.
Protect the battery from heat, from continuous exposure to sun and keep away from radiation or
other heat sources. Do not leave the battery in the mower in direct sunlight over long periods.
The battery is supplied partially charged. To ensure full capacity of the battery, charge the battery
Battery LED Indicators
The battery is equipped with a charge-level indicator panel which indicates its charge condition.
This charge-level indicator panel consists of 4 LEDs on the battery. Press and hold the charge
indicator button on the battery to actuate the charge level indicator. The charge level indicator
LEDs go out after releasing the button. The battery charge level can be checked either when the
®
24LFC12 battery charger.
21