Publicidad
Phillips Screwdriver, Wood Glue, Mallet or Padded Hammer, Tape Measure
Ka
1. Apply a thin film of glue in the dowel holes in the Left Side Assembly (B). Attach Front and Back
Sleepers (D and E) to the Left Side Assembly (B). Gently tap with a mallet and quickly wipe up any
excess glue with a damp rag. Insert #8x1-1/4" Pan Head Screws (Ka) through the Sleepers and
into the Side Assembly. See Figure 1.
Fig. 2
2.
Apply a thin film of glue in the dowel holes in the Right Side Assembly (C). Attach the Front and Back
Sleepers (D and E) to the Left Side Assembly (B). Gently tap with a mallet and quickly wipe up any
excess glue with a damp rag. Insert #8x1-1/4" Pan Head Screws (Ka) through the Sleepers and
into the Side Assembly. See Figure 2.
631Wa Grace Side Table
Assembly Instructions
Tools Required:
Important Note:
Apply finish before you assemble this unit.
Before doing so, completely read enclosed Finishing Hints.
E
Ka
E
Ka
D
Ka
B
Fig. 1
C
D
Ka
E Ka
E
Ka
D
Page 3 — 631Wa — 12/13
Publicidad
