ULTIMATE SPEED USLK 22 B2 Manual De Instrucciones página 19

Remove the type 2 plug from the
charging infrastructure and the
vehicle:
–if you are not using the product
–if you are doing cleaning work
–if the product is damaged
–after the ingress of foreign
objects or in the event of
abnormal noises
–before undertaking any
maintenance works
Before connecting the product
to the charging infrastructure,
check that the voltage and
current rating corresponds
with the charging infrastructure
details shown on the product's
rating label .
The type 2 plugs must fit into the
socket of the vehicle/charging
infrastructure . The type 2 plugs
must not be modified in any
way .
The product's maximum total
output power/current (see
following table) must never be
exceeded .
Take special care when
connecting vehicles that
consume high amounts of
power .
Model
number
HG10382 22 kW (32 A)
Max. charging
capacity
Do not connect the product in
series .
Avoid switching maximum loads
frequently on or off in order
to sustain a long life for the
product .
m WARNING! Risk of radio
interference!
Do not use the product on
aeroplanes, in hospitals,
service rooms, or near medical
electronic systems . The wireless
signals transmitted could impact
the functionality of sensitive
electronics .
Keep the product at least 20 cm
from pacemakers or implantable
cardioverter defibrillators, as
the electromagnetic radiation
may impair the functionality
of pacemakers . The radio
waves transmitted could cause
interference in hearing aids .
The OWIM GmbH & Co KG is
not responsible for interference
with radios or televisions due
to unauthorised modification of
the product . The OWIM GmbH
& Co KG further assumes no
liability for using or replacing
cables and products not
distributed by OWIM .
GB/IE 19