ULTIMATE SPEED USLK 22 B2 Manual De Instrucciones página 21

3 . Check whether the product and all parts are
in good condition, if any damage or defect is
detected, do not use the product, but follow the
procedure described in chapter "Warranty" .
˜ Operation
˜ Starting the charging process
Fig . E
WARNING! Risk of electric shock!
Always connect the product to the vehicle
before you connect the product to the charging
station .
WARNING! Do not use a cord extension set
m
with the product (Fig . D) .
INFO:
The charging time depends on the following
o
factors:
– Vehicle battery capacity
– Vehicle battery charging status
– Charging infrastructure capacity
Monitor the charging process during charging:
o
– via the vehicle dashboard
– via the charging station display
1 . Switch off the engine of the vehicle .
2 . Unwind the charging cable
3 . Open the charging port of the vehicle .
4 . Remove the cover cap
type 2 plug .
[ 5 ]
5 . Connect the type 2 plug
the vehicle .
6 . Remove the cover cap
type 2 plug .
[ 2 ]
7 . Connect the type 2 plug
the charging infrastructure .
8 . Start the charging process at the charging
infrastructure . The type 2 plugs
automatically be locked . The charging process
begins .
˜ Finishing the charging process
INFO:
Charging complete: The locking of the
o
type 2 plugs /
2 ] [ 5 ] [
released .
After charging: Wind up the charging
o
cable . Do not kink the charging cable .
[ 3 ]
.
[ 3 ]
of the
[ 4 ]
to the socket of
5 ] [
of the
1 ] [
to the socket of
2 ] [
/ can
[ 2 ] 5 ] [
can automatically be
1 . Disconnect the type 2 plug
of the vehicle .
2 . Close the charging port of the vehicle .
3 . Place the cover cap
4 . Disconnect the type 2 plug
of the charging infrastructure .
5 . Place the cover cap
˜ Cleaning
WARNING! Risk of electric shock!
Before cleaning the product: Disconnect
the type 2 plugs
[ 2 ]
infrastructure/vehicle .
Never immerse the product in water or any
other liquid . Never hold the product under
running water .
Do not allow water or other liquids to get
inside the product .
m NOTICE! Risk of property damage!
Do not use abrasive, aggressive cleaning
materials or hard brushes for cleaning .
1 . Clean the product with a slightly moistened
cloth or a soft brush .
2 . After cleaning: Allow the product to dry
completely .
˜ Storage
Wind up the charging cable
o
the charging cable .
Store the product in the storage bag
o
Store the product at a dry location out of the
o
reach of children .
˜ Disposal
Packaging:
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities .
Observe the marking of the packaging
materials for waste separation, which
are marked with abbreviations (a) and
numbers (b) with following meaning:
1–7: plastics/20–22: paper and
fibreboard/80–98: composite materials .
from the socket
5 ] [
on the type 2 plug
[ 4 ] [ 5 ]
from the socket
[ 2 ]
on the type 2 plug
1 ] [ 2 ] [
/ from the charging
[ 5 ]
. Do not kink
[ 3 ]
.
6 ] [
GB/IE
.
.
21