Publicidad
Idiomas disponibles
Idiomas disponibles
8. Using the supplied
hardware, install the kick plate to the panel making sure to only snug-up the screws.
DO NOT TIGHTEN SCREWS EXCESSIVELY
9. Reinstall lock/latch and panel back onto the truck
10. If opposite panel has no lock/latch, repeat steps above without using lock/latch to line up the kick plate to the panel. Instead,
line up the outer edges to desired position using roughly the same edge gap as the first install.
Page 2 of 6
IIPB051
05/2016
Publicidad
