Publicidad
Idiomas disponibles
Idiomas disponibles
OPERATION OF MILK FROTHER
I. Warm milk froth (thick foam)
1.Place the appliance on a flat surface.
2.Then open the lid, insert the frothing whisk onto the shaft on the bottom of
frother.
3.Fill the frother with the desired amount of milk, and cover with the lid.
Note:
To avoid milk overflowing after frothing, the max quantity for frothing milk
is 150ml (5.1oz) (see Fig. 1), The min quantity for frothing milk is 75ml
(2.5oz).
Please use whole milk or semi-skimmed at refrigerator temperature (about
6-8 °C).
4.Connect the plug to the power supply.
5.Press the FUNTION button once, the working indicator of "Warm milk froth (thick
foam)" will flash. Then press the ON/OFF button, the frother will start to work.
Once it is finished, the frother will stop.
Note: During operation, you can stop frothing by pressing the ON/OFF button once.
6. When the frother has stopped operating, open the lid, pour out the warmed and
frothed milk to enjoy it.
7. Always turn off the milk frother and disconnect the power supply when not use.
MAX Level for Heating(300ml / 10.2oz)
MAX Level for Frothing(150ml / 5.1oz)
Min Liquid level(75ml / 2.5oz)
Fig.1
-EN.04-
Publicidad
