Yissvic MK1000-UL Manual De Instrucciones página 7

Cold milk froth
1. Place the appliance on a flat surface.
2. Then open the lid, insert the frothing whisk onto the shaft on the bottom of
frother.
3. Fill the frother with the desired amount of milk, and cover with the lid.
Note:
To avoid milk overflowing while frothing, the max quantity for frothing
milk is 150ml (5.1oz) (see Fig. 1), The min quantity for frothing milk is 75ml
(2.5oz).
Please use whole milk or semi-skimmed at refrigerator temperature (about
6-8 °C).
4. Connect the plug to the power supply.
5. Press the FUNTION button four times, the working indicator of "Cold milk froth" will
flash. Then press the ON/OFF button, the frother will start to work. Once it is finished,
the frother will stop.
Note: During operation, you can stop frothing by pressing the ON/OFF button once.
6. When the frother has stopped operating, open the lid, pour out the cold and frothed
milk to enjoy it.
7. Always turn off the milk frother and disconnect the power supply when not use.
CAUTIONS
1. At least 3 minutes to rest between 2 continuous cycles, otherwise, the frother
will enter self-protection state automatically after working for 5 cycles continuously,
the working indicator will flash and the switch button will not be activated. After
about 5 minutes, the frother will enter standby state and you can continue to
operate it.
2. Please clean the frother according to the section "CLEANING AND MAINTE-
NANCE" after using.
SPECIFICATION
UL Power Valtage: 110V-120V
UK Power Valtage: 220V-240V
Rated Power: 600W
Frothing Capacity: 150ml(max)
Rated Frequency: 50/60HZ
N.W./G.W.: 800g/1000g
Protection Class: I
-EN.06-