Publicidad
Idiomas disponibles
Idiomas disponibles
Protect this device from shocks and abuse. Avoid brute force when operating the
device.
Familiarise yourself with the functions of the device before actually using it. Do not allow operation
by unqualified people. Any damage that may occur will most probably be due to unprofessional use
of the device.
All modifications of the device are forbidden for safety reasons. Damage caused by user modifications
to the device is not covered by the warranty.
Only use the device for its intended purpose. All other uses may lead to short circuits, burns,
electroshocks, lamp explosion, crash, etc. Using the device in an unauthorised way will void the
warranty.
Damage caused by disregard of certain guidelines in this manual is not covered by the warranty and
the dealer will not accept responsibility for any ensuing defects or problems.
Do not switch the device on immediately after it has been exposed to changes in temperature.
Protect the device against damage by leaving it switched off until it has reached room temperature.
Use the appropriate power supply (see Technical Specifications below).
Lighting effects are not designed for permanent operation: regular operation breaks will prolong their
lives.
Keep this manual for future reference.
4.
Features
2 functions: continuously on or music-controlled operation
5.
Installation
Install the device in a location where few people pass by and that is unreachable for unauthorized
persons.
Make sure there is no flammable material within a 50 cm radius of the device.
6.
Use
Make sure the power switch is set to "OFF".
Insert the DC jack of the adaptor in to the device, and plug the adaptor into the mains outlet. Only
use the included adaptor or one with the same specifications.
Set the power switch to "ON". The device starts operating.
Set the power switch to "AUDIO" for music controlled operation through the built-in microphone.
You can control the lightning inside the ball by touching it carefully.
Set the power switch to "OFF" to stop the device.
7.
Cleaning and Maintenance
Mechanically moving parts must not show any signs of wear and tear.
The electric power supply cables must not show any damage. Have a qualified technician maintain
the device.
Disconnect the device from the mains prior to maintenance activities. Let the device cool down.
Wipe the device regularly with a moist, lint-free cloth. Do not use alcohol or solvents.
Do not immerse the device in any liquid.
There are no user-serviceable parts.
Contact your dealer for spare parts if necessary.
V. 05 – 26/11/2014
VDL8PL
3
©Velleman nv
Publicidad
