Hoover Asciugatrice NDP Manual De Instrucciones página 64

6. REMOTE CONTROL (WI-FI)
This appliance is equipped with Wi-Fi
technology that allows you to control it
remotely via App.
APPLIANCE PAIRING (ON APP)
l
Download the Hoover Wizard App on
your device.
The Hoover Wizard App is available
for devices running both Android and
iOS, both for
smartphones.
Get all the details
functions by browsing the App in
DEMO mode.
The frequency of the home Wi-Fi
network has to be set on the 2.4 GHz
band. You can not configure the
machine if your home network is set
to the 5 GHz band.
l
Open the App, create the user profile
(or log-in if it is already created previously)
and pairing the appliance following the
instructions on the device display or the
"Quick Guide" attached on the machine,
or at the link:
go.he.services/hd500mt
TO ENABLE REMOTE CONTROL
l
Check that the router is switched on and
connected to the Internet.
l
Load the laundry and close the door.
l
Turn the programme selector to the
REMOTE CONTROL (Wi-Fi) position
the controls on the control panel will be
disabled.
tablets and for
of the Wi-Fi
l
Start the cycle using the Hoover Wizard
app. When
completed, turn off the machine by
turning the programme selector to the
OFF position.
TO DISABLE REMOTE CONTROL
l
To exit REMOTE CONTROL mode while
a cycle is underway, turn the programme
selector to any position other than
REMOTE CONTROL (Wi-Fi), without
going through the OFF. The control
panel on the appliance will be operative
once again.
l
With the door closed, turn the programme
selector to the REMOTE CONTROL (Wi-
Fi) position to control the appliance using
the app once again. If there is a cycle
underway, it will continue.
With the door opened, the REMOTE
CONTROL will
enable it again, close the door, turn
the programme
position other
CONTROL and then select it again.
:
64
the cycle has
be disabled.
selector to
than REMOTE
been
To
any