Hoover Asciugatrice NDP Manual De Instrucciones página 66

WARNING
Don't touch the buttons while inserting
the plug because
calibrates the systems during the first
seconds: touching the buttons, the
machine couldn't work property. In
this case, remove the plug and repeat
the operation.
PROGRAMME SELECTOR with
OFF position
l
Rotating the programme selector in both
directions it's possible to select the
desired drying programme.
l
To cancel the selections or switch off the
appliance rotate the programme selector
on OFF (remember to unplug the appliance).
First starting
- Language setting
l
After connecting the machine to the
network and turning it on, press the
"D" "E"
button or
the available languages. ENGLISH is
always the first language shown.
l
Select the desired language pressing the
START/PAUSE button.
- Change the language
If you want to change the setting language
you will have to press simultaneously
"E"
and buttons for about 5 seconds.
ENGLISH will appear on the display, and
you will be able to choose a new language.
START/PAUSE button
Close the porthole BEFORE pressing
the START/PAUSE button.
the machines
to see on the display
"D"
l
To start the selected cycle with the preset
parameters, press START/PAUSE. When
the programme is running, the display will
show the time to elapse.
l
Moreover, if you want to modify the
chosen programme, press the desired
options buttons,
parameters and then press START/
PAUSE button to start the cycle.
Only the options compatible with the
set programme can be selected.
l
After switching on the appliance, wait a few
seconds for the programme to start running.
PROGRAMME DURATION
l
When a programme is selected the
display automatically shows the cycle
duration, which can vary, depending on
the options selected.
l
Once the programme has started you will
be kept informed constantly of the time
remaining to the end of the drying cycle.
l
The appliance calculates the time to the
end of the selected programme based
upon a standard loading, during the cycle,
the appliance corrects the time to the
humidity level of the load.
PROGRAMME END
l
"END" ("End" on some models) will
appear in the display at the end of the
programme, it is now possible to open the
door.
l
At the end of the cycle, turn off the
appliance by turning the programme
selector to the OFF position.
The programme
ALWAYS be put in the OFF position at
the end of the drying cycle before a
new one can be selected.
66
modify the default
selector must