Ibiza Light FLASH-COLOR-STROBE Manual De Uso página 5

MANUAL - FLASH-COLOR-STROBE
Product Set Set Dis
Temp
Send
Information Info Ver
Temp
CARE
Before cleaning the unit, disconnect it if from the mains. Do not use aggressive cleaning agents. Use a clean
cloth to wipe any dust or dirt from the product. We are not liable for damage arising from incorrect handing,
improper use or wear and tear. We reserve the right to make technical modifications.
SPECIFICATIONS
Power supply ................................................................................................................... 110-240V~ 50/60Hz
Consumption .......................................................................................................................................... 100W
Beam angle ..............................................................................................................................................135°
Light source ......................................................... 256x 3-in-1 RGB LED type 5050 spread over 32 segments
..................................................................................... 128x white LED type 5730 spread over 16 segments
Strobe ................................................................................................................................ 0 – 25 flashes/sec.
Dimensions ....................................................................................................................... 320 x 160 x 75mm
Weight .................................................................................................................................................. 1.85kg
10s
20s
30s
60s
On
50C ~ 65 C
Yes
Send
Vxxx
XX C
https://ibizashop.eu/
Set the backlight time of the display
from 10 seconds to continuous lighting.
The default setting is 10 seconds
Protective temperature can be set in
the range of 50 ~ 65 ℃. When the lamp
temperature reaches the protection
value, the power will gradually reduce.
Send the channel mode of the current
fixture to all other fixtures
Soft version software version number
Current temperature of the fixture
(degrees Celsius), if the temperature
detection circuit fails, the display shows
an error
5