Publicidad
Idiomas disponibles
Idiomas disponibles
3. The lamp controls :
1 = ON/OFF
2 = Mode selection button
3 = Time selection button
Time indicators
(in minutes)
4. Turn on the lamp, in an already lit environment, with
the on / off switch located at the bottom right of the lamp
(middle button above : 1). This first press of the switch trig-
gers an intense bluish white light (default mode) that is very
effective from a therapeutic point of view.
5. The time selection button (3) is used to set the time of
your light therapy session, after which the lamp switches
off automatically.
: 15 minutes
: 30 minutes
: 45 minutes
: 60 minutes
- Once the lamp is on the White + Blue light Mode, the stan-
dard time is 30 min with the high intensity.
- A press on 3 must pass the lamp into medium intensity
for 45 min
- Another press on 3 must pass the lamp into low intensity
for 60 min.
6. Then a press on the mode selection button above (2) trig-
gers a predominantly blue light of lower intensity as effective
as the intense white bluish light.
- Once the lamp is on the Blue light mode, the standard time
is 30 min with the high intensity.
- A press on 3 must pass the lamp into medium intensity for
45 min
- Another press on 3 must pass the lamp into low intensity
for 60 min.
7. Another press on the mode selection button (2) offers
a neutral white light (without blue) for additional lighting
without therapeutic aim. The standard is the high intensity.
A press on 3 must pass the lamp into medium intensity.
Another press on 3 must pass the lamp into low intensity.
There is not Timer on this light mode
- After that, another press on 2 bring us to the bluish white
light (default mode) and the cycle starts all over again.
8. For the therapeutical mode, the time decreases, and the
indicator lights go out progressively, once the programmed
time has been used up, the lamp switches off automatically.
- You can turn off the device by simply pressing the on / off
switch (1).
WELLBI
EN
Publicidad
