PVI WCR530 Manual De Instrucciones página 5

INSTALLATION INSTRUCTIONS
1. Ramp comes preassembled. Position the
1
ramp approximately the ramp's length out
from the step or platform. Stand ramp up on
end with the open ends down and the handle
side toward you. Reach down and lift first half
of ramp toward the step or landing area and
set it down on top of support. Make sure hook
is pressed firmly against step.
2. Open top half of left side ramp panel (A).
2
3. Unfold left side ramp panel (A) toward you
3
and once again make sure ramp hooks are
pressed firmly against landing area.
A
B
A
B
A
B
1. Ramp comes preassembled.
Position the ramp approximately
the ramp's length out from the
step or platform. Stand ramp up on
end with the open ends down and
the handle side toward you. Reach
down and lift first half of ramp
toward the step or landing area
and set it down on top of support.
Make sure hook is pressed firmly
against step.
2. Open top half of left side ramp
panel (A).
3. Unfold left side ramp panel (A)
toward you and once again make
sure ramp hooks are pressed firmly
against landing area.
5
5
1
2
3
A
B
A
B
A
B