Publicidad
Idiomas disponibles
Idiomas disponibles
INSERT CABLE CLIP
• insert plastic cable clip into hole on the
back of handle column.
Push cables
into clip.
Hairpin
Shift Rod
Shift Lever
Indicator
Handle Column
Cables
Cable Clip
CONNECT
SHIFT ROD
1. Insert end of shift rod farthest from
bend into hole of shift lever indicator.
2.
Insert hairpin clip through hole of shift
rod to secure with bend of clip on right
side.
L-
Attach this End To shift
Lever Indicator
Shift Rod
REMOVE TILLER FROM CRATE
1. Adjust handle assemby to lowest
position. Be sure lock lever is tight-
ened securely.
2. Make sure shift lever indicator is in "N"
(neutral) position.
3. Tilt tiller forward by lifting handle.
Separate cardboard cover from
leveling shield.
4. Rotate tiller handle to the right and
pull tiller out of carton.
CHECKTIREPRESSURE
The tires on your unit were overinflated at
the factory for shipping purposes. Correct
and equal tire pressure is important for
best tilling performance.
• Reduce tire pressure to 20 PSI.
HANDLE HEIGHT
• Handle height may be adjusted to
better suit operator.
(See "TO ADJUST
HANDLE HEIGHT"
in the Service and
Adjustments
section of this manual).
7
Publicidad
