Kenwood DMX129DAB Guia De Inicio Rapido página 15

Installation Installation
Ñ Connecting wires to terminals
Light Blue/Yellow (Steering remote control wire)
To steering remote
To use the steering wheel remote control feature,
you need an exclusive remote adapter (not
supplied) matched to your car.
Light Green (Parking sensor wire)
Accessory 5: Extension cable
Connect to the vehicle's
parking brake detection
switch harness.
Purple/White (Reverse sensor wire)
Connect to vehicle's reverse
lamp harness when using the
optional rear view camera.
Connector A
Connector B
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
Sold separately
[2]
DMX129DAB only
[3]
For best safety, be sure to
connect the parking sensor.
M4x6
1 3 5 7
2 4 6 8
1 3 5 7
2 4 6 8
Fuse (15A)
ISO Connector
Bright Green/Red
ST REMOTE
Purple/Red
INPUT 1
ST REMOTE
Gray/Red
INPUT 2
ST REMOTE
Connect to vehicle's steering remote
GND
harness.
Contact your KENWOOD dealer for details.
MIC
USB terminal
5V=1.5A
REAR OUT FRONT OUT AV IN
L
FM/AM antenna input
R
DAB antenna input
DAB [3]
ANT
CAM IN VIDEO OUT VIDEO IN
(SMB connector)
!
Use of a CX-DAB1(optional accessory) as a
DAB antenna is recommended. When using a
commercially available DAB antenna, the diameter of
the SMB connector must be Φ6.5 mm or less.
Φ 6.5 mm (maximum)
Rear Audio Preout
(Left; White, Right; Red)
Front Audio Preout
(Left; White, Right; Red)
REAR OUT FRONT OUT AV IN
AV-IN audio input
(Left; White, Right; Red)
AV-IN visual input (Yellow)
CAM IN VIDEO OUT VIDEO IN
Visual Output (Yellow)
Rear view camera input (Yellow)
Accessory 4:
Bluetooth Microphone
(1.0 m)
[1]
USB device
Cap
Subwoofer Preout
SUB
WOOFER
FM/AM
antenna
[3]
English |
[2]
Cap
15