Kenwood DMX129DAB Guia De Inicio Rapido página 16

Installation
Ñ Wiring harness connector function guide
Pin Color and function
A-4 Yellow
A-5 Blue
[1]
A-7 Red
A-8 Black
B-1/ B-2 Purple (+) / Purple/Black (–) Rear Right
B-3/ B-4 Gray (+) / Gray/Black (–)
B-5/ B-6 White (+) / White/Black (–)
B-7/ B-8 Green (+) /
Green/Black
Max. 150mA, 12V
[1]
• Speaker Impedance: 4-8 Ω
!
CAUTION
Before you connect the commercially available
ISO connectors to the unit, check the following
condition:
• Make sure that the pin assignment of the connector
matches with the KENWOOD unit.
• Take extra notice of the power wire.
• In case battery wire and ignition wire are not
corresponding then change them accordingly.
• In case the car does not have an ignition wire, use a
commercially available interface.
16
Battery
Power Control
Ignition (ACC)
Earth (Ground) Connection
Front Right
Front Left
(–) Rear Left
Ñ Connecting an iPhone/Android
USB cable
[2]
Lightning-USB cable
[2]
Cap
USB maximum power supply current :
[1]
DC 5 V = 1.5 A
Sold separately
[2]
DMX129DAB only
[3]
Android smartphone
iPhone [2]
USB terminal (1.0 m)
[1]
5V = 1.5A
M4x6
REAR OUT FRONT OUT AV IN
L
R
DAB
ANT
CAM IN VIDEO OUT VIDEO IN
[2]
[3]