MTD 240 Serie Manual Del Operador página 8

4. Insert theleftend ofthe tineclutch c ontrol into thehole on
the left side of the upper handle. See Fig. 3-3.
Figure 3-3
5. Insert the Z-fitting on the clutch cable into the hole on the
tine clutch control. Hook the "Z" end into the opening from
the inside to the outside as shown in Fig. 3-4.
Z-fitting
Figure 3-4
6. Squeeze the tine clutch control inward. Insert the right end
into the hole on the right side of the upper handle. See Fig.
3-5.
f
\\
J
Figure 3-5
Set-Up
(;as& Oil Fill-Up
Service the engine with gasoline and oil as instructed in the
separate engine manual packed with your tiller. Read the
instructions carefully.
il_g_kli WARNING! Use extreme care when handling
gasoline. Gasoline is extremely flammable and the
vapors are explosive. Never fuel machine indoors or
while the engine is hot or running.
8 I
SECTION3-- ASSEMBLY &
SET-UP