Crafstman 172.10722 Manual Del Propietário página 11

1.
Terry cloth bonnets can be machined washed in cold water, using a small
amount of detergent. Then machine dried at medium temperature.
HOWEVER, we recommend hand washing and air drying for longer
bonnet life.
2. Wax applicator bonnets should only be used once, and then disposed
of properly.
3. To prolong the life of the foam pad, ALWAYS store the buffer/polisher with
the pad face up.
4. Remove the bonnet from the foam pad when the buffer/polisher is not in use,
so the pad can dry out and retain its original shape.
5. DO NOT USE ABRASIVE COMPOUNDS WITH THIS TOOL.
6. DO NOT apply too much wax to the bonnet. Applying too much wax causes
the bonnet to become saturated and it will not last as long. THIS MAKES
POLISHING MORE DIFFICULT AND IT TAKES LONGER.
7. If the bonnet is continually coming off the pad, you may be using too much
wax.
8. If buffing seems difficult, you have used too much wax,
9. ONLY USE a mild soap solution and a damp sponge to clean the
buffer / polisher.
10. DO NOT immerse any part of the buffer / polisher in liquid.
Look for these Craftsman accessories, they are specially designed to make
your 10-in. Buffer/Polisher more efficient to use. Accessories are available at
your local Sears store or other Craftsman outlet.
Wax Applicator Bonnets
For applying waxes and polishes
Terry Cloth Bonnets
Use for removing wax and for buffing and polishing
Polishing Bonnets
For final buffing and polishing to a "showroom shine"
Quality Waxes
For the finest protection and appearance
CAUTION: ALWAYS remove accessories from tool before washing them.
11