Publicidad
Idiomas disponibles
Idiomas disponibles
BEFORE
YOU BEGIN TO WAX, BUFF AND POLISH
YOUR CAR:
1. Wash, clean and dry your vehicle.
2. Remove
all road tar, excess grease spots and bug stains with a
general-purpose
cleaner.
3. Make sure the work area is dry.
ATTACHING
THE WAX APPLICATOR
BONNET
TO THE FOAM PAD
(See Figure
2)
WARNING:
When changing accessories,
BE SURE that the switch is in the (OFF)
position and the cord is unplugged.
1. Place wax applicator bonnet on foam pad
as shown in Fig. 2.
2. ALWAYS
make sure that the elastic strip
on the bottom
of the bonnet
is securely
tucked
on the underside
of the foam pad.
APPLYING
WAX TO BONNET
(See Figures
3 and 4)
IMPORTANT:
DO NOT APPLY WAX
DIRECTLY
ON CARt
APPLYING
PASTE WAX TO BONNET
(See Figure
3)
1. Spread
a heaping teaspoon
of wax
evenly over entire surface
of applicator
bonnet
using a putty knife or any other
flat object (See Fig. 3).
Fig.
APPLYING
LIQUID WAXTO
BONNET
(See Figure
4)
1. Apply three swirls of wax over applicator
bonnet (See Fig. 4).
2. This should
be enough
to cover 1/4 of
car surface.
3. For the second
and third applications,
only use about one half as much as on
first application.
The bonnet
will not
absorb
as much wax on these
applications.
Fig._
7
Publicidad
