Publicidad
Idiomas disponibles
Idiomas disponibles
Setting the clock
(CURRENT TIME SET)
Set the current time before using On/off Timer (page
28) and Channel Block features (page 29). For example,
set the clock to 3:15 p.m., Monday.
+4/-$
MODE
Low position ——'
1 Press MENU.
2 Press + ¢ or- ¥ to select TIMER/CH BLOCK
and press RETURN.
@TIMER/CH
BLOCK
»CURRENT
TIME
SET
GA).
. eum
=70y\ CETURN
DAYLIGHT
SAVING: NO
MENU
--~~AM
Exit
Use
+
If you need to set DAYLIGHT SAVING, follow the
procedure on the previous page.
3
Make sure the cursor (>) is beside CURRENT
TIME SET, and press RETURN.
If the cursor is not beside CURRENT TIME SET,
press + # or— ¥ to move the cursor and press
RETURN.
RETURN fh
@ CURRENT TIME SET
—---AM
>»
Use
+ FEU
Exit
HW
4 Set the current time.
(1) Press RETURN to start setting the time.
RETURN ty
(2) Press +
or — $ to set the day and press
RETURN.
@ CURRENT
TIME
SET
PSUN
12:00
AM
>MENU
G@ CURRENT
T1ME
SET
PMON
12:00
AM
2DMENU
Exit
(3) Using + # or - § and RETURN, set hour and
minute in the same way as in step (2).
When you press RETURN after setting the
minute, the clock starts.
@ CURRENT
TIME
SET
GRO
RETURN]
"Swen | 78
CHO
Use ¢ FEA
Exit
Mal
If you make a mistake while setting the time
Press RESET while the CURRENT TIME SET menu is
displayed, then repeat step 4.
To display the current time
Press DISPLAY.
Note
* If you unplug the projection TV or a power interruption
occurs, the clock will be erased. Reset the current time.
Operations
27-EN
Publicidad
