Sony KP-46V25 Manual De Instrucciones página 33

Operating video
equipment
You can operate a piece of video equipment that has an
infrared remote sensor with the supplied remote
commander. Before operating, set the manufacturer's
code number.
—~
a a a ae
Setting the manufacturer's code
The following Sony video equipment is assigned to
each position of the selector at its factory preset:
VTR1 Beta, ED Beta VCR
VTR2 8mmVCR
VTR3 VHS VCR
You can change the settings of each position.
MODE
Low position +
1 Set the VTR 1-2-3 selector to the position
you want to set the code.
2 While pressing CODE SET, press 0 - 9 to
enter the manufacturer's code number (see
the chart in the right column) and press
ENTER. For example, to operate a Sony 8
mm VCR, press 0, 2 and ENTER.
"BGG? Sk
Note
* To use another manufactuer's equipment besides a Sony VCR
set the selector to a position not being used for your Sony
video equipment.
VCR manufacturer code numbers
Manufacturer Code number
SONY 01, 02, 03, 04
CANON 05
EMERSON 22, 30, 33
FISHER 10, 11, 12, 15
FUNAI 29
GENERAL ELECTRIC 05, 08
GOLDSTAR 25
HITACHI 07, 08, 36
Jvc 16, 35
MAGNAVOX 05, 06, 09
MITSUBISHI 18, 19, 26, 27
MULTITECH 29
NEC 16, 23, 31
PANASONIC 05, 06, 37
PHILCO 05, 06
PHILIPS 05, 06, 09
QUASAR 05, 06
RCA 07, 08
SAMSUNG 24, 32
SANYO 11,15
SCOTT 21
SHARP 13, 14
SHINTOM 34
SYLVANIA 05, 06, 09
SYMPHONIC 29
TEKNIKA 28, 29
TOSHIBA 20, 21
TOTE VISION 25
ZENITH 17
(continued)
Operations | 33-EN