5. Secure the motor/drum assembly, the bag hook and
the stanchions using the relative screws, nuts and
washers (Fig. 6).
6. Pass the closing strap through the dust upper bag's
mouth that has a device for fixing it to the hook. Hang
the bag on the hook. Place the open end of the filter
bag on the drum's edge. Once done, adjust the closing
strap so that the tensioner is in the closing system's
teeth. Press the tensioner's handle to lock the bag in
place. Make sure the closing strap is in the manifold's
throat before locking the tensioner.
Position the lower bag like the upper bag but from the
manifold's lower part without suspending it (Fig. 7).
7. Attach the two-outlet manifold to the suction cowling
and fit the two handles on the two black lateral
stanchions.
Fig. 6
Fig. 7
Fig. 8
11