Publicidad
Idiomas disponibles
Idiomas disponibles
EN
USING YOUR TOWER FAN (CONT.)
Auto Display Off
Turn on Auto Display Off if you would like the
display to automatically turn off when there is
no operation.
1.
Press and hold
on Auto Display Off.
2. After 60 seconds of no operation, the
display will automatically turn off (except in
Advanced Sleep Mode).
3. Tap any button to temporarily turn the
display back on. If you don't tap another
button, the display will turn back off after
60 seconds.
4. Press and hold
off Auto Display Off.
Memory Function
When the tower fan is in standby or turned
off and unplugged, it will remember all its
previous settings, except for timer.
C A R E & M A I N T E N A N C E
Cleaning the Tower Fan
•
Unplug before cleaning.
•
Wipe the outside of the tower fan with
a soft, dry cloth. If necessary, wipe
the housing with a damp cloth, then
immediately dry.
•
Use a vacuum, duster, or compressed air
to clean the inside of the tower fan.
•
If necessary, use a Philips screwdriver
to remove the back cover and clean the
inside of the tower fan. [Figure 2.1]
Note:
•
Make sure the tower fan is turned off
before removing the back cover.
•
Clean the internal parts with a dry cloth.
9
for 3 seconds to turn
for 3 seconds to turn
Figure 2.1
•
Do not clean with abrasive chemicals or
flammable cleaning agents.
Replacing the Remote Control
Battery
1.
Insert a coin/button battery into the slot
and rotate counterclockwise to remove
the battery compartment. [Figure 2.2]
2. Remove the old battery.
3. Replace with a new 3V CR2025 battery.
Make sure the polarities match.
4. Replace the battery compartment.
Figure 2.2
Storage
If not using the tower fan for an extended
period of time, cover the tower fan and
store in a cool, dry place to avoid moisture
damage.
Rotate
Remove
Publicidad
