Publicidad
Idiomas disponibles
Idiomas disponibles
EN
G E T T I N G S TA R T E D
1.
Remove all packaging.
2. Snap the two pieces of the base
together. [Figure 1.1]
3. Unscrew the plastic nut from underneath
the tower fan. [Figure 1.2]
4. Secure the base to the tower fan with the
plastic nut. [Figure 1.3]
5. Place the tower fan on a flat, stable
surface such as the floor.
7
Figure 1.1
Figure 1.2
Figure 1.3
6. When using the tower fan, allow at least 38
cm / 15 inches of clearance from the front
of the tower fan. Keep away from anything
that would block air flow, such as curtains.
[Figure 1.4]
Figure 1.4
U S I N G YO U R TOW E R FA N
1.
Plug in and tap
2. Tap
to change fan speed from 1 (low) to 5
(high).
3. Optionally, tap
mode.
4. Tap
to turn Advanced Sleep Mode on/off.
Fan Modes
Tap
to cycle through fan modes: Normal,
Turbo, and Auto.
Normal Mode
Use Normal Mode to manually control the
tower fan's speed. Tap
speed from 1 (low) to 5 (high).
•
This is the tower fan's default mode.
•
will show on the display.
38 cm /
15 in
to turn on the tower fan.
to select a different fan
to change fan
Publicidad
