GPS Outdoor Computer SFN 1.5 A1
Operating environment/environmental conditions
• Do not place any heavy objects on the housing, otherwise you risk seriously damaging your
device.
• The GPS device is not suitable for use in high-temperature or high-humidity conditions and must
be kept free of dust. Operating temperature and operating humidity: 5 ºC to 35 ºC, max. 85
% RH.
• If the GPS device is exposed to wide temperature fluctuations condensation can form and
cause moisture which can produce a short circuit. If this occurs, use the GPS device only after
it has reached the ambient temperature.
• Make sure that no fire hazards (e.g. burning candles) are placed on or near the device.
Otherwise there is the risk of fire and short-circuit.
Getting started
Charging the battery
Please charge the battery for at least five hours before first use of the GPS
device.
1. Open the cover for the USB port (6).
2. Connect the small end of the USB cable supplied to the USB port (6) and the other end to the
USB port on your computer.
It may be that your computer needs to be switched on so that there is power to
the computer USB port to charge your GPS device. Not all computers provide
power to the USB port when they are switched off.
As soon as your GPS device is charging, the screen will switch on. A "Welcome" message will
appear for a few seconds, followed by a PC connection display with a battery charge icon.
English
79