Descargar Imprimir esta página

Fisher-Price BML91 Manual Del Usuario página 10

Publicidad

Setup and Use Preparación y uso
Restraint Pad
Almohadilla de sujeción
Restraint Straps
Cinturones de sujeción
1
Securing Your Infant
• Place your child in the seat. Position the
restraint pad between your child's legs.
• Fasten the restraint straps to the restraint
pad. Make sure you hear a "click" on
both sides.
• Check to be sure the restraint system is
securely attached by pulling it away from
your child. The restraint system should
remain attached.
• Tighten each waist belt so that the restraint
system is snug against your child. Please
refer to the next section for instructions to
tighten the waist belts.
Sistema de sujeción
• Sentar al niño en la silla. Poner la
almohadilla de sujeción entre las piernas
del niño.
• Abrochar los cinturones de sujeción a la
almohadilla de sujeción. Cerciorarse de
oír un "clic" en ambos lados.
• Verificar que el sistema de sujeción
esté bien seguro, jalándolo en dirección
opuesta al niño. El sistema de sujeción
debe permanecer conectado.
• Apretar cada cinturón de la cintura de
modo que el sistema de sujeción quede
bien ajustado al niño/a. Consultar la
siguiente sección para mayores detalles
sobre cómo apretar el cinturón.
A
B
TIGHTEN
2
APRETAR
To tighten the restraint straps:
• Feed the anchored end of the restraint strap
up through the buckle to form a loop
Pull the free end of the restraint strap
To loosen the restraint straps:
• Feed the free end of the restraint strap up
through the buckle to form a loop
Enlarge the loop by pulling on the end of the
loop toward the buckle. Pull the anchored
end of the restraint strap to shorten the free
end of the restraint strap
Para apretar los cinturones de seguridad:
• Introducir el extremo fijo del cinturón
de seguridad en la hebilla para formar
un espacio
. Jalar el extremo libre del
A
cinturón de seguridad
Para aflojar los cinturones de seguridad:
• Introducir el extremo libre del cinturón
de seguridad en la hebilla para formar un
espacio
. Agrandar el espacio jalando el
A
extremo del cinturón hacia la hebilla. Jalar
el extremo fijo del cinturón de seguridad
para acortar el extremo libre del cinturón
de seguridad
B
10
B
A
LOOSEN
AFLOJAR
.
B
.
B
.
A
.
B
.
.
A

Publicidad

loading

Este manual también es adecuado para:

Y8641