Descargar Imprimir esta página

Parkside PAAP 12 C3 Traduccion Del Manual De Instrucciones Originale página 29

Pulidora recargable

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 123
Polishing
• Please refer to the information from the
polishing agent manufacturer.
• Test the polishing pads (10/11), imitati-
on fur (13) and polishing agent prior to
use on an inconspicuous area.
• Use the orange polishing pad (10) for
pre-polishing, the black polishing pad
(11) for post-polishing, and the imitati-
on fur (13) for high-gloss polishing and
to remove excess polishing agent.
• Put some polishing agent onto the poli-
shing pad (10/11). Put polishing agent
onto an area slightly smaller than the
area you wish to polish on the workpiece
and spread the polishing agent manually.
• Move the device evenly over the sur-
face to be polished.
• Do not apply any pressure. Pressing
onto the workpiece does not improve
the work result.
• Do not allow the polishing agent to
dry. Therefore do not work in direct
sunlight or on a heated surface. There
is a risk of surface damage!
Selection of attachment
To touch-up, use the sandpaper (12). The
sandpaper is suitable for working on wood
and metal surfaces.
To polish, use the following attachments in
this order:
1. Polishing pad, orange (10)
2. Polishing pad, black (11)
3. Imitation fur (13)
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Always check the device before using it
for obvious defects such as loose, worn
or damaged parts, correct the positioning
of screws or other parts. Examine the
polishing disc in particular. Exchange the
damaged parts.
Cleaning
Do not spray the appliance
with water and do not im-
merse it in water. Electric
shock hazard!
• Keep clean the ventilation slots, motor
housing and handles of the appliance.
Use a damp cloth or a brush.
Do not use cleaning agents or solvents.
You may otherwise irreparably dam-
age the appliance.
• Thoroughly clean the polishing pads
(10/11) and the imitation fur (13) after
each use by hand. Only use mild soa-
py water.
Maintenance
The appliance cleaner is maintenance free.
GB
IE
29

Publicidad

loading

Este manual también es adecuado para:

359693 2101