Elicent R10 PIR Manual De Instrucciones página 14

Dismantling and recycling
The product you have purchased is an Elicent R10-PIR,
REMOTE INFRA-RED SENSOR, designed for connection to
a max load of 4 A.
This is a passive infra-red motion detector which constantly
monitors its detection area.
Following the below listed instructions will ensure that the
product will be electrically and mechanically reliable and will
extend its service life.
INSTALLATION AND USAGE PRECAUTIONS
CAUTION: This symbol indicates that, while
following the below indicated instructions, care
must be take to avoid people's injury or death.
- The manual explains how to install correctly, use and perform
maintenance on the product. Following these instructions will
ensure that the product will be electrically and mechanically
reliable and will extend its service life.
- Do not use this product for any purpose other than that for
which it was designed and as illustrated herein.
- After removing the product from the packing, make sure that
it has not been damaged. If doubts arise, immediately contact
professionally qualifi ed personnel.
- Do not leave packing parts within the reach of children or
unskilled people. Do not dump any hazardous parts into the
environment (polystyrene, plastic, polypropylene, etc.).
- If the product is dropped or badly knocked, immediately
contact q ualifi ed p ersonnel ( authorised d ealer o r m anufacturer)
to check that the product operates correctly.
- The use of any electrical device requires compliance with
some basic rules which are listed below:
-do not touch the device with moist or wet parts of the
body (hands, feet).
DESCRIPTION AND USE
page 17
14