Publicidad
Idiomas disponibles
Idiomas disponibles
en
ENGLISH
13. Technical Specifications
Explanatory notes regarding the specifications on
page 3. Subject to change in accordance with
technical progress.
S
= spindle lock for easy tool changes
U
= Voltage of battery pack
n
= No-load speed (maximum speed)
n
*
= No-load speed (adjustable)
V
D
=Maximum accessory diameter
max, grinding
(grinding)
D
=Maximum accessory diameter
max, polishing
(polishing)
T
= max. thickness of bonded grinding discs
max
d
= collet bore of the collet chuck
m
= Weight with smallest battery pack
L
= maximum insertion depth
max
Measured values determined in conformity with
EN 60745.
Permitted ambient temperature during operation:
-20 °C (-4°F) to 50 °C (120°F) (limited performance
with temperatures below 0 °C (32°F)). Permitted
ambient temperature for storage: 0 °C to 30 °C.
Machine in protection class II
direct current
The technical specifications quoted are subject to
tolerances (in compliance with relevant valid
standards).
Emission values
These values make it possible to assess the
emissions from the power tool and to compare
different power tools. The actual load may be higher
or lower depending on operating conditions, the
condition of the power tool or the accessories used.
Please allow for breaks and periods when the load
is lower for assessment purposes. Arrange
protective measures for the user, such as
organisational measures based on the adjusted
estimates.
Vibration total value (vector sum of three directions)
determined in accordance with EN 60745:
a
= Vibration emission value unbalance disc
h, SG
a
= Vibration emission value with mounted
h, S
point 628330 on steel
a
= Vibration emission value with cutter
h, F
628377 on aluminium
K
= Uncertainty (vibration)
h,...
U
= Unbalance
M
Typical A-effective perceived sound levels:
L
= Sound pressure level
pA
L
= Acoustic power level
WA
K
, K
= Uncertainty
pA
WA
The noise level can exceed 80 dB(A) during
operation.
Wear ear protectors!
Electromagnetic disturbances:
In individual cases, the speed may fluctuate
temporarily if the machine is exposed to extreme
external electromagnetic disturbances or the
electronic restart protection may respond. In this
case, switch the machine off and on again.
18
Publicidad
