Publicidad
Idiomas disponibles
Idiomas disponibles
Operation of "DFS Alarm"
Providing the installation and setting of the "DFS Alarm Setting Menu" has been per-
formed correctly, operation of the "DFS Alarm" is very simple.
Arming Alarm
To arm your Alarm simply turn off the ignition and detach the front panel, as described on
page 36. After detaching the front panel the "DFS Alarm" will automatically arm itself
after 30 seconds, providing all of the doors are closed. If after 30 seconds, a door still
remains open the DFS Alarm will not arm until the last door has been closed. After closing
all of the doors, ensure that they are securely locked. The LED indicator on the head unit
will flash as a visual deterrent. Your vehicle is now protected by your "DFS Alarm".
Disarming Alarm
Upon entering your vehicle, and within the "Entry Delay Time" set within the "DFS Alarm
Menu", attach your Pioneer Detachable Face as described on page 36.
If you have forgotten your Detachable Face, simply insert the ignition key in the ignition
and turn the key from "OFF" to "ON" within the "Entry Delay Time."
Entry Detection
If the "DFS Alarm" was not disarmed in accordance with "Disarming Alarm," the "DFS
Alarm" will be triggered. The "DFS Alarm" will sound for 60 seconds and will repeat 5
times if any door is left open or reopened. After the fifth time the "DFS Alarm" will reset
to prevent continuous sounding and prevent your battery from discharging.
Precaution:
• Upon returning to your vehicle and before opening any doors, check to see if the LED indicator
is still flashing. If the LED is no longer flashing, it indicates that the Alarm has sounded.
Disarming, as described above, is still necessary.
46
Publicidad
