Reset Menu; Lock Menu - tbs electronics Expert Modular Manual Del Propietário

Tabla de contenido

Idiomas disponibles

7. RESET MENU

In the Reset menu, you can reset a number of battery monitor items. This menu can be accessed by

the following sequence:

When the Reset menu is entered, you can use the left and right keys to browse through the different

reset items. By pressing the MENU key, the selected reset item can be viewed. The default value for

all reset items is NO. To actually reset the selected item, use the left and right keys to change the

value from NO to YES or vice versa. Pressing the MENU key again, will step back to the Reset menu.

All reset items set to YES will only be reset once the Normal Operating Mode is accessed again by

pressing the MENU key for 3 seconds. The following Reset menu items are available:

Table 11

Reset item

Reset description

r 1.0

Reset Alarms. Use this item to suppress all present alarms. Associated alarm

contacts will be turned off and the alarm indicator on the display will also be

turned off. A suppressed alarm can only be re-triggered when the alarm's off

conditions are met first.

r 1.1

Reset Maintenance Hours. Resets the maintenance hour counter (status item S4.1).

This reset item is only of importance when maintenance hours are enabled

(function F4.1 is set to ON). Use this reset item when a maintenance job has been

performed.

r 1.2

Reset Battery. Use this item to reset your current battery status and history

information. This can be applied after you have installed a fresh battery of the

same specifications as the previous one.

r 1.3

Factory Reset. This reset item can be used to reset all Function, Status and History

values to factory default values. After a factory reset, the Expert Modular restart to

the Setup Wizard again.

In the Lock menu, you can lock or unlock the Function setup and Reset

by entering a pin code. Locking these menus can be useful to prevent untrained personnel for

making any changes to the instrument's settings. This menu can be accessed by the following

sequence:

menu of the Expert Modular

Tabla de Contenido

Tabla de contenido