Publicidad
Idiomas disponibles
Idiomas disponibles
Care
& Cleaning
Control
Panel
Clean with
a soft, damp
cloth. Do not use abrasive
sub-
stances.
Tumbler
Remove
any
stains
such
as crayon,
ink pen
or fabric
dye from
new
items
(such
as towels
or jeans)
with
an
all-purpose
cleaner.
Then
tumble
old towels
or rags to
remove
any
excess
stain
or cleaning
substance.
Once
these
steps
are done,
stains
may
still
be visible,
but
should
not transfer
to subsequent
loads.
Cabinet
Wipe off any marks
with soap
and water.
Use an appli-
ance wax once a year if desired.
Dryer
Exhaust
System
Inspect
and clean once a year to maintain
optimum
per-
formance.
The outside
exhaust
hood
should
be cleaned
more
frequently
to ensure
proper
operation.
(Refer
to
the Installation
Instructions
for more
information.)
Replacing
the Drum
Light
Instructions
for replacing
the bulb:
1. Unplug
or disconnect
the dryer
from
the electrical
power
supply.
2. Open
the
door
and
use
a Phillips
screwdriver
to
remove
the screw
attaching
the lens
to the tumbler
front.
3. Remove
lens cover by pulling
cover toward
center
of
tumbler.
4. Rotate
bulb cotulter-clockwise
to remove
from socket.
5. Replace
the bulb with
a 120 volt,
10 watt
maximum
candelabra
base light bulb.
6. Turn the light bulb
clockwise
into socket.
7. Replace
lens cover by hooking
plastic
tabs into tum-
bler front below
the light housing.
8. Reinstall
the screw
into the lens cover
screw hole.
9. Reconnect
dryer
to power
supply.
Publicidad
