Metabo AS 20 L PC Manual Original página 18

en ENGLISH
Certain kinds of dust are classified
as carcinogenic such as oak and
beech dust especially in
conjunction with additives for wood
conditioning (chromate, wood
preservative).
5. Overview
See page 2.
1 Roll brake
2 Container
3 Sealing cap (only M/H devices)
4 Suction opening
5 Socket for power tools (only ASA devices)
6 Carry handle
7 Upper part
8 Fixture for case system
9 Case system unlocking mechanism
10 Volume flow control display (only M/H devices)
11 Storage compartment
12 Switch on/off/automatic (not for AS devices)
13 Snap lock
14 Mains cable
15 Rubber for hose fixing
16 Roll protection/side handle
17 Rear end suction hose
18 Front end suction hose
19 Fixtures for vacuum cleaner bags
20 Filter bag *
21 Accessory fixtures for nozzles and hose
22 Screws
23 Filter closure
24 Filter cover
25 Filter
26 Filter cage
27 Float
28 Connecting sleeve
29 Auxiliary air slide
30 Air inlet
31 Button for filter cleaning 'PressClean' (PC)
32 Fleece filter bag (p. 4)
33 PE disposal bag (p. 4)
34 Special filter bag H-class (p. 4)
* depending on equipment/not included in scope of
delivery
6. Initial operation
Before commissioning, check that the
rated mains voltage and mains frequency
stated on the type plate match your power
supply.
6.1 Inserting a fleece filter bag 635424000
(32)
We recommend using fleece filter bags for:
18
- Applications, where small amounts of fine dust are
created (e.g. spot-grinding and grinding of paint
and lacquer coatings, extraction of drilling
applications with small diameters < 10 mm of
short duration, etc.).
- Use of machines, such as: routers, planers, small
grinding machines, etc.
When using a fleece bag the filter cleaning is non-
functional.
Switch off machine. Unplug power cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (13). Remove the upper part (7) of
the device from the container (2).
See illustration C, page 2. Insert a new fleece filter
bag in the fixture (19) provided.
Replace the upper part of the device on the
container, close the snap locks.
6.2 Inserting a PE disposal bag 635425000/
635426000 (33)
We recommend the use of PE-disposal bags for:
- Applications, where larger amounts of dust are
created (e.g. removal of plaster surfaces, spot-
grinding and grinding of screeds, etc.).
- Use of machines, such as e.g.: renovation milling
machines, renovation grinders, drywall grinders,
wall grinders etc.
switch machine OFF; Unplug power cable; Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (13). Remove the upper part (7) of
the device from the container (2).
Spread out the PE disposal bag (33) evenly across
the container floor. The round holes of the bag must
be on the inside of the container. Arrange the edges
of the PE disposal bag around the container rim so
that the PE disposal bag is firmly clamped on all
sides by the upper part (7) once replaced.
Replace the upper part of the device on the
container, close the snap locks.
6.3 Special filter bag H-class 635427000 (34)
The special filter bag must be used in the case of
harmful dust.
Switch off machine. Unplug power cable. Ensure
the plug cannot be reconnected accidentally. Open
the snap locks (13). Remove the upper part (7) of
the device from the container (2).
Spread out the PE disposal bag evenly across the
container floor. Arrange the edges of the PE filter
bag around the container rim so that the PE bag is
firmly clamped on all sides by the attached upper
part (7). The round holes of the bag must be on the
inside of the container.
Insert a new fleece filter bag in the fixture (19)
provided.
Replace the upper part on the container and close
the snap locks
6.4 Mount accessory fixtures for nozzles and
hose (21)
Fix accessory fixture (21) with enclosed screws and
suitable tools to the device as sown in fig. D p. 2.