Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 14

LCD Screen
Meter g Phase
Phase is the second item in the Meter menu. It contains 3 subheads
that cover load-levels and other power metrics for each of the phase
combinations used to derive output power (L1-L2, L2-L3, L3-L1). Screen
sets for each of these phase combinations provide data for Watts (W), Volt-
Amps (VA), Volt Amp Reactive (VAR), Power Factor (PF), Amps (A), Volts (V),
Frequency (Hz), Load Percentage (Load), Kilowatt hour Consumption (kWh)
and Peak power levels.
6.0 – Arrow 6.1 – Choose
Down to Phase L1-L2
Meter
PDU Total
Phase
Banks
Outlets
ENTER
Sensor
6.4 – ESC 6.5
L1-L2
Energy
0.000 kWh
Since Last Reset:
0/0/0
0:0:0
6.2
Phase
L1-L2
L2-L3
L3-L1
ENTER
To 6.1 (Repeat for
L2-L3 and L3-L1)
L1-L2
L1-L2
Peak Power of
L2-L3
0W
L3-L1
Since Last Reset:
ESC
0/0/0
0:0:0
14
6.3
L1-L2
0W 0.00A
0VA
0VAR --- Hz
0.00PF
Phase
L1-L2
--- V
0% Load