Tripp-Lite PDU3EVN1G60B Manual Del Propietário página 21

LCD Screen
Settings g Language
Language is the 3rd item in the Settings submenu. It contains controls that
allow the PDU LCD screen to display in English, Spanish, French or Russian.
14.1 – Use
Arrow Keys
14.0 – to Select a
Language Language
Settings Language Setting
Display
IPv4
Language
THD Con g
ENTER
Iso Breaker
SNMP Reset
Set Password
Settings g THD Configuration
The PDU's built-in THD measurement facility provides continuous Voltage
THD level monitoring for all power line phases. When set to Enable, THD
notifications occur when the THD value goes above the specified Threshold.
THD Config is the 4th item in the Settings submenu. It allows the
configuration of the THD distortion threshold of the PDU AC input to be a
recorded event.
Note: THD can also be set to Disable.
15.1– Arrow
Up/Down
to Disable.
Press OK to
Go to 15.0 or
15.0 – THD Press Enter to
Config Proceed.
Settings
Display
IPv4
Language
THD Con g
ENTER
Iso Breaker
SNMP Reset
Set Password
Back to
14.0
English
Spanish
French
Russian
ENTER
15.2 – Arrow Up/
Down to Change
Percentage.
Press Enter,
then Enter
Again to Go to
15.0
THD Con g
THD Threshold THD Threshold
Enable
ENTER
21
Back to
15.0
THD Con g
5
ENTER
OK