GOOD HOUSEKEEPING Kingsley Manual Del Propietário página 15

Existing Construction – accessible only from below
D11
D12
EXISTING FAN
E
Remove an existing fan and check to make sure the Move the housing into position above the ceiling.
opening is large enough to accommodate the new
motor housing (8"x 8.5").
D13
D14
Attach existing ducting to duct connector. Tape joints.
Pull wires through strain relief.
If ducting does not fit securely,
an adapter may need to be purchased.
D15
E
Install the housing flush with the sheetrock and secure
by tightening the pre-loaded screws into the joist.
15
42103-01 R20230807