Create IRON 2600 Manual Del Usuario página 9

1. Unplug the iron and wait for the soleplate to cool down.
2. Empty the water tank after each use. Do not store the iron with water in it.
3. Wind the cord not too tightly around the heel at the back of the iron.
4. Store the iron vertically on its heel to protect the soleplate from scratches, corrosion and stains.
When placing the iron on its stand, ensure that the surface on which the stand is placed is stable.
Before cleaning the appliance, unplug it and wait for the soleplate to cool down.
To clean the outer body of the iron, simply wipe it with a damp cloth and if necessary, use a mild detergent.
Never use alcohol or abrasive cleaners.
You can easily wipe starch and other residues from the soleplate with a damp cloth.
To avoid scratching the ceramic finish, never use a scourer and do not place it on a rough surface.
Do not iron synthetic fabrics at too high of a temperature to avoid ruining the fabric and covering the
soleplate with melted remains of the fabric.
The best way to remove synthetic residue from the soleplate is to heat the iron and to iron over an old
cotton rag.
In order to extend the life of your iron, use the Self-Cleaning function once a month.
• Allow your iron to heat up with the tank half-full and standing on its heel (on MAX temperature).
• When the thermostat light goes out, unplug the iron and hold it in a horizontal position, over a sink.
• Set the steam control tab to the maximum position. Boiling water and steam will now start coming out
from the holes in the soleplate.
• Shake the iron gently, over the sink, until the water in the water tank (with the impurities) has flowed out
through the soleplate.
• Turn the steam control tab to the "0" position.
• Turn the iron back on and set the temperature control knob to the "MAX" position. Let the iron heat up
again, the remainder of the water inside the steam chamber will now vaporize and leave the iron through
the soleplate.
• Unplug the iron, and when the soleplate is just warm, wipe it with a soft cloth.
We advise you do the dry-steaming over and old piece of cloth.
EN
Power
Voltage
Frequency
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
AFTER EACH USE
CLEANING
SELF-CLEANING
TECHNICAL SPECIFICATIONS
Characteristics
2600W
220-240V AC
50Hz
E NGLI SH
9