cecotec CONGA ROCKSTAR NON-STOP JALISCO Manual De Instrucciones página 24

ENGLISH
1. PARTS AND COMPONENTS
Fig. 1
1. Battery release button
2. On/Off button
Filter access
3.
4. Vacuuming-tube release button
5. Vacuuming tube
6. Vacuuming-brush-head release button
Jalisco brush
7.
8. Dust tank
9. Dirt-tank opening button and filter access
10. Battery indicator
11. Power selector
12. Power adapter
13. Accessory for corners
14. 2 in 1 Accessory
15. Wall bracket
NOTE:
The graphics in this manual are schematic representations and may not exactly match the
product.
2. BEFORE USE
This upright vacuum cleaner includes a package designed to protect it during transport.
-
Take the product out of the box and remove all packaging materials. Keep the original box
and other elements in a safe place, as this will help you prevent product damage when
transporting it in the future. In case the original packaging is disposed of, make sure all
packaging materials are recycled accordingly.
Make sure all parts and components are included and in good conditions. If any of them
-
are missing or not in good condition, please contact Cecotec's official Technical Support
Service immediately.
- Fully charge the device before first use.
The normal charge time is 5 hours approx. When the battery is fully charged, unplug it.
-
Box contents
- Conga Rockstar NonStop vacuum cleaner
2 in 1 Accessory
-
46
CONGA ROCKSTAR NON-STOP JALISCO
- Corner accessories
- Jalisco brush
Rigid vacuuming tube
-
Wall bracket
-
- Power adapter
- Instruction manual
3. PRODUCT ASSEMBLY
Vacuuming tube and brush head assembly
- To install the vacuuming brush head into the vacuuming tube, align both making sure the
tab on the brush head matches the guides on the tube, and introduce one into the other
until they are firmly fixed.
- To disassemble them, press the Vacuuming-brush-head release button, and pull from the
vacuuming tube while you hold the vacuuming brush head.
NOTE:
When assembling these 2 parts, make sure the handle and the brush are facing the same
direction.
Vacuuming tube, vacuuming brush head, and main body assembly. Fig. 2
To complete the vacuum cleaner's installation, once the vacuuming brush head is mounted on
the vacuuming tube, hold the tube vertically and insert it into the main body.
Assembling the battery. Fig. 3
- Introduce the battery in the slot located in the main body following the guides. Once it is
introduced, it will click into place. Once inserted, check that it is secured in position.
To disassemble the battery, press the release button and remove the battery.
-
NOTE:
Remove the battery and store it in a safe, dry place if the device is not going to be used in a
long period of time.
4. OPERATION
You can use this vacuum cleaner in two different manners:
- Handheld vacuum cleaner, attaching the accessories directly to the main body.
Upright vacuum cleaner, using the vacuuming tube with the accessories assembled.
-
ENGLISH
47
CONGA ROCKSTAR NON-STOP JALISCO