Create WIPE XT Manual Del Usuario página 10

Always turn off the appliance before cleaning and maintaining it.
Shake the appliance to rinse the separator with the water left in the clean water tank.
Clean the suction nozzle under running water (not dishwasher safe).
Caution: The body of the appliance contains electrical components. Do not clean this under
running water!
Remove the wiping cloth from the wiping pad and rinse it under running water. This cloth
is washing machine safe and can be washed at a temperature of up to 50 ºC (without any
fabric softener).
Let the appliance dry prior to assembly.
Store the appliance in an upright position in a dry room.
PROBLEM
Spray bottle does not spray.
The appliance does not start.
Streaks while cleaning.
Water is leaking from the air louvers.
In compliance with Directives: 2012/19/EU and 2015/863/EU on the restriction of the use of dangerous
substances in electric and electronic equipment as well as their waste disposal. The symbol with the
crossed dustbin shown on the package indicates that the product at the end of its service life shall be
collected as separate waste. Therefore, any products that have reached the end of their useful life must
be given to waste disposal centres specialising in separate collection of waste electrical and electronic
equipment, or given back to the retailer at the time of purchasing new similar equipment, on a one for one
basis. The adequate separate collection for the subsequent start-up of the equipment sent to be recycled,
treated and disposed of in an environmentally compatible way contributes to preventing possible nega-
tive effects on the environment and health and optimises the recycling and reuse of components making
up the apparatus. Abusive disposal of the product by the user involves application of the administrative
sanctions according to the laws.
E NGL I SH
10
CLEANING AND MAINTENANCE
TROUBLESHOOTING
Refill the detergent container.
The pump mechanism of the spray bottle is defective. Please,
contact the manufacturer.
Check the light pilot:
• No signal or slowly blinking signal: low power, please charge
the battery.
• Quick blinking signal: contact the manufacturer.
Clean the removable lip.
Reverse the used removable lip:
• Pull the silicone squeegee to the side. Wet the squeegee in the
area of the curve with water or detergent. Slide the silicone
squeegee back in the holder in reverse order.
Replace the removable lip if necessary.
Adjust the dosing of cleaning solution.
Empty the dirt water reservoir (max. content: 50ml).
SOLUTION