Create WIPE XT Manual Del Usuario página 8

When unpacking the product, make sure that no accessories are missing and that none
of the package contents have been damaged. If you detect any transport damages please
contact your dealer.
Assembly
Attach the suction nozzle to the main
body until it snaps in place audibly.
Filling the spray bottle
Pour a small amount of concentrated disinfectant (20 ml) into the spray bottle, slowly fill it
with clear water (makes 250 ml of detergent solution) and close the bottle.
Charging the battery
Plug the charger delivered with the appliance into a proper socket and insert the charging
cable plug to the back of the appliance.
Note: During the charging process, the pilot will blink. Once the battery is fully charged, it
will be permanently illuminated.
E NGL I SH
8
BEFORE FIRST USE
Open the spray bottle and attach the wip-
ing accessory, then place the cap on the
bottom and fit the wiping cloth.