Miele DOS K 85 flex Instrucciones De Montaje página 18

en - Connection
Flowmeter
18
Connecting the dispensing module to the cleaning ma-
chine
The K 85 dispensing module is supplied with a flowmeter which mon-
itors the dispensing of liquid media.
Highly viscous chemical agents can cause problems with dispenser
monitoring. In this case the dispenser monitoring system for labor-
atory applications should be switched off by the Miele Customer
Service Department.
Strain relief for dispensing hoses
The strain relief provided with the dispensing modules for the dis-
pensing hoses is fitted to the bottom right-hand side of the back of
the machine to prevent the hoses from dislodging themselves from
the dispenser connections during use.
Connecting the dispensing hoses
The dispensing module is tested at the factory for functionality.
Any residues of the harmless test medium are a result of this testing
and not evidence of previous use.
Pull the safety cap off the end of the hose and remove the protect-

ive foil from the siphon.
Connect the hose with the dispenser connection to the cleaning

machine.