Publicidad
Idiomas disponibles
Idiomas disponibles
SAFETY PRECAUTIONS
Failure to follow the safety precautions may result in the risk of serious injury.
Do not exceed the maximum weight limit of 136 Kg.
Do not exceed the maximum load limit in the basket (5kg). Loads must only be carried in the basket. Do not hang
heavy objects on the rollator as this could affect its stability.
Make sure that all parts are securely fastened and in good working order.
Regularly check the screws and fasteners of the rollator and at the same height.
Make sure that the handle locking latch is securely engaged.
Do not use the rollator in stairs or escalators.
Use only accessories and parts supplied by the manufacturer.
The rollator is a walking aid only. It is not a wheel chair. It is not designed to carry a person. Such usage can
damage the wheels and the rollator structure. The rollator could then be weakened and no longer meet the
mecanical features.
Only use the rollator as a walking aid.
Do not use the rollator for walking backwards.
Before seating, make sure that the bars locking latch are fully engaged. Serious injuries to the user and/or chassis
damages and /or wheels can result from the incorrect usage.
Do not make any adjustments to the rollator while in use.
All wheels must always be in contact with the ground.
Make sure to put both hands on the handles so that the rollator is in an even position of strength.
Make sure that the seat is fully locked in a flat position before use.
Do not try to push the rollator when someone is seated on it.
Do not use the seat to carry objects.
Do not use the seat without its backrest.
Do not seat on the seat when the rollator is on a slope.
While seated, do not try to reach objects by leaning forward. Do not lean backwards, the rollator could then tilt.
Use caution when climbing pavements or walking on inclined, uneven, or slippery surfaces. Failure to do so may
result in a significant risk of falling or injury.
Do not use the walker on a wet, icy, or snowy slope.
If any parts are damaged, broken or worn, contact the distributor.
ASSEMBLY
1.
Remove all packaging from rollator.
2.
Remove the chassis and put it in front of you.
3.
Unfold the structure and lower the seat.
4.
Join the (oval) tubes of the front wheels and the (round) tubes of the rear feet into the structure, and adjust
to the right height, making sure of the perfect locking.
ATTENTION : The seat height can be adjusted independently from the height of the front wheel tubes and the
rear feet tubes.
DMI-F-12_Annexe 2_Notice.2
V2-15/12/2022
Page 8 sur 17
Publicidad
