It is essential that both front wheels are adjusted on the same height to avoid imbalance. The same applies
to the rear feet.
5.
Install the handles to the desired height and lock with the adjuster as shown below.
ATTENTION : To adjust the handle heights, unscrew the adjuster, adjust the height, then screw the adjuster.
Always adjust the two handles to the same height to avoid any imbalance.
We recommend to place the handles at the user's wrist height
6.
Install the backrest onto the chassis by pressing the button as shown below
SEAT
The seat is adapted for short rests and is not suitable for normal seating.
Check that the rollator is on an even surface, the front wheels and rear feet are perfectly in contact with the
ground before seating.
FOLDING
The rollator can be folded for storage or transportation.
Pull seat upwards. It will fold completely the rollator. Mind your fingers during folding.
DMI-F-12_Annexe 2_Notice.2
V2-15/12/2022
Page 9 sur 17