cecotec CECOFRY FULL INOX 5500 CONNECTED Manual De Instrucciones página 23

ENGLISH
the original packaging is disposed of, make sure all packaging materials are recycled
accordingly.
- Make sure all parts and components are included and in good conditions. If there is any
piece missing or not in good condition, immediately contact the Technical Support Service
of Cecotec.
- Clean the basket and grill thoroughly with hot water, washing-up liquid, and a non-abrasive
sponge.
Clean both the interior and the exterior of the device with a damp cloth.
-
- Make sure all parts of the air fryer are completely dry and place the rack in the basket
properly.
- Place the air fryer on a stable, flat surface.
Warning
- Do not get the heating element inside the air fryer wet.
- Do not fill the air fryer with oil or any other liquid.
Do not place the device on any surface that it is not heat-resistant.
-
Please note
You may notice a slight burning smell or smoke when using the fryer for the first time, caused
by the excess of lubricants from the manufacturing process. This will not affect the fryer's
safety.
3. OPERATION
Place the air fryer on a stable, flat surface.
1.
2. Connect it to a mains socket.
3. Use the handle (4) to remove the basket (3), do it carefully. Make sure the rack (5) is
correctly placed in the basket (3).
Put the ingredients inside the basket (3).
4.
5. Place the basket back (3). The fryer has a safety system that will not allow you to use it if
the basket is not in place (3).
6. Press the On/off icon (8), then select the desired pre-set function (13) or set the desired
time (1-60 minutes) and the temperature (80-200ºC) and press the On/off icon (8). The
fryer will start running.
7. If at any point during cooking you wish to pause the process, press the On/off icon. If
you wish to end the cooking process, hold down this icon (8) for 3 minutes. If you do not
press any icon for the next minute after pausing, the fryer will enter standby mode and
will beep 3 times.
8. When you hear an alarm, it means that the preparation time has come to an end. Use the
handle (4) to remove the basket (3). Depending on the type of ingredients, steam may be
44 CECOFRY FULL INOX 5500 CONNECTED
CECOFRY FULL INOXBLACK 5500 CONNECTED
released, so be careful when removing the basket (3).
9. Check if the ingredients are ready. If not, put the basket (3) back inside the device and set
the timer for a few more minutes.
10. To remove the ingredients, place the basket (3) on a heat-resistant surface.
11. Place the basket ingredients on a proper container. Use tongs to remove ingredients, as
this will prevent residual cooking oil from dripping onto the container. Be careful not to
burn yourself. Do not place the basket (3) upside down to remove the food.
12. You can continue using the fryer if desired or you can finish the cooking process. To do so,
hold down the On/off icon (8) for 3 seconds.
Control panel
On/off icon
- When the basket (3) and the rack (5) are placed in the correct position inside the air fryer,
the On/off icon (8) will light up.
To turn the air fryer on, press the On/off icon (8), the air fryer will beep, and the display will
-
show 200ºC / 18 minutes alternately.
- You can set the desired time and temperature or select a pre-set function. Press the On/
off icon (8) to start the selected function or the manual setting. If you press this icon again
(8), the fryer will pause.
- To finish the cooking process, hold down the On/off icon (8) for 3 minutes.
WI-FI/Connectivity icon
The air fryer has a Smartphone App that connects the device through W-Fi and allows for
complete control of the cooking processes.
Device pairing
By scanning the following QR code, you can download the APP on
Android and iOS.
By scanning the following QR code, you can view and follow the instructions to link the product
to your mobile device using the WI-FI network and APP.
ENGLISH
CECOFRY FULL INOX 5500 CONNECTED 45
CECOFRY FULL INOXBLACK 5500 CONNECTED