DeLonghi Dedica Arte EC885.GY Instrucciones página 16

DESCALING
7
7. Empty the container used
to collect the descaler
solution and replace it
empty.
11. When the water tank is empty, the orange light goes out and
descaling is complete. The
12. Close the steam dial turning it to 0 position.
13. Fill the water tank with fresh water.
Now the appliance is ready to use.
Please note
14. EXPLANATION OF LIGHTS
Lights
Fill up to
MAX
level
8. The machine is now ready
for rinsing through with
clean water. Extract the
water tank, empty, rinse
under running water, fill
with fresh water up to the
MAX level and put back in
the machine.
and lights flash.
Operation
The ON/OFF button is turned on
When the machine is turned on
Steam dial open
Cleaning & Cooling Cycle required
8
9. Make sure the steam dial
is in the position,
then press the
button to start rinsing.
During rinsing, to clean the
brewing unit, close the
steam dial from time
to time to deliver small
quantities of water from the
brewing unit.
Explanation of lights
The machine performs a self-diagnosis
cycle, indicated by sequential flashing of
the lights
Flashing lights: the machine is heating
up to make coffee
Lights on steadily: the machine is ready
to make coffee
Flashing lights: close the steam dial
Activate the Cleaning & Cooling Cycle as
described in section "6.1 Cooling Cycle".
15
Fill up to
MAX
level
9
10. Make a second rinse from
step 7 to 9 inserting the
water filter hardness (if
previously installed).
10
→